Dancover TentZing, Руководство пользователя

Страница: 5 / 7

standing by itself supporting the Tent.
Get the A frame entrance poles (undone) and enter the tent.Once in, click
them into place and put the metal spike on the top of the A frame through the
matching hole in the canvas above the door. Now move the A frame forwards
into the door space until it is upright. (There are places either side of the door
to keep the poles in situ.)
6:
5:
: 7
canvas loops at the bottom end of the roof. After this they can be left attached
in place for your next trip.
N.B. All the guy ropes need to follow the lines of the seams in the roof. Adjust
the guy rope slider so you have approx 50cm of loop to the peg.This allows
adjustment in both directions.It is important to make sure the Bell Tent stays
symmetrical and that the tension is evenly spread.
the door. Then do the guy ropes around the whole tent without putting any of
them under too much tension.
Zip the door shut and, using the large pegs, attach the first guy rope above
The first time you use the tent you will have to attach the guy ropes to the
4: Adjust the pole so it stands in an upright position. This should be ok to leave