12
2. Auto Defrost By Weight:
Microwave Oven automatically calculates defrost time based on weight entered.
Please refer to the below chart for details.
Press Key Pad Defrost Program Food Category Weight Scope
Once
dEF 1
Chicken
0.1 ~ 6.0lbs.
Twice
dEF 2
Meat
0.1 ~ 4.0lbs.
Three Times
dEF 3
Fish
0.1 ~ 3.0lbs.
a) Press the "Auto Defrost" key, the display will show the available defrost programs.
Press the "Auto Defrost" key repeatedly to scroll through the available programs.
b) Press the number keys to enter the weight of the food in lbs. Example, 0.8lb, press "8"
or 2.5lb, press "2" & "5". (each time a key is depressed, a signal/beep will sound) If a
wrong weight is entered or you want to enter a new weight, press the "Stop/Clear" key
and repeat steps " a & b". The (red) indicator light for "Weight" & "lb." along with the
weight entered will appear in the display.
c) Press the "Start" key to start the defrost program. The (red) indicator light (Defrost)
"Weight" & "lb" will go off and the (red) indicator light (Defrost) "Time" will begin to flash.
The microwave oven automatically calculates defrost time (based on food weight and
defrost program selection) and is shown in the display. The timer countdown begins as
soon as the "Start" key is pressed. At the end of the program, a signal/beep will sound
(5 times) indicating the program is finished.
3. One Stage Microwave Cooking:
Allows you to cook using one power level only.
NOTE: Unless a lower power level is selected, the microwave oven is programmed to
operate at full (100%) power.
Please refer to the below chart for details. (PL = Power Level)
Press Key Pad Display
Cooking Power Level
Once
PH1 (Phase/Stage 1 Cooking)
Twice
PL9
100%
Three Times
PL8
80%
Four Times
PL7
70%
Five Times
PL6
60%
Six Times
PL5
50%
Seven Times
PL4
40%
Eight Times
PL3
30%
Nine Times
PL2
20%
Ten Times
PL1
10%
Eleven Times
PL0
0%
a) Press "Power" key repeatedly to select cooking power level.
b) Enter cooking time by pressing number keys in sequence.
Example: if you want a cooking time of 13:40, press 1,3,4,0.
c) Press the "Start" key. The "Stage 1" (red) indicator light will flash and the timer
countdown begins. At the end of the program, a signal/beep will sound (5 times)
indicating the program is finished.
