CARE AND MAINTENANCE
AUTOMATIC DEFROSTING
There is no need to defrost the refrigerator, because ice
depositing on the inner back wall is defrosted automatically.
Ice build-up on the inner back wall during the compressor
operation; will (when the compressor has cycled off) defrost
automatically. Defrost water collects inside the drain passing
through the drain outlet in the inner back wall into a drain pan
situated above the compressor from where it evaporates.
CLEANING THE APPLIANCE
Disconnect the power before cleaning the appliance.
Do not use coarse or abrasive cleaning agents as you can
damage the surface.
Clean the exterior with water and detergent.
Remove the detachable accessories in the interior of the
appliance and clean with water and liquid detergent. Plastic
parts cannot be washed in dishwashers.
Wash the interior of the appliance with lukewarm water,
adding one or two spoonfuls of vinegar. After cleaning
connect the appliance to the power supply and reload it
when the temperature is cold enough.
SWITCH OFF APPLIANCE
WHEN NOT IN USE
If you do not intend to use the appliance for long periods of
time (vacations) set the thermostat knob to OFF (0) position,
disconnect the power supply, take out the foods and defrost
and clean the appliance. Leave the door slightly open.
POWER FAILURE
Most power failures are corrected within an hour or two and
will not affect your refrigerator temperatures. However, you
should minimize the number of door openings while the
power is off. During power failures of longer duration, take
steps to protect your food by placing dry ice on top of
packages.
IF YOU MOVE
Remove or securely fasten down all loose items inside the
unit. To avoid damaging the leveling legs, turn them all the
way into the base.
Some Important Rules for the Correct Use of the
Refrigerator
• Never place hot foods in the refrigerator.
• Never place spoiled foods in the refrigerator.
• Don’t overload the refrigerator.
• Don’t open the door unless necessary.
• Should the refrigerator be stored without use for long
periods, it is suggested, after a careful cleaning, to leave
the door ajar to allow the air to circulate inside the unit in
order to avoid possible formations of condensation, mold
or odors.
6
