Call us 1-800-263-2629
OPERATING THE DEVICE
Please refer to the Owners Manual.
4
Connect the power cord buckle in
the bucket to the back of the unit.
5
Screw the direct drain connector to
the drain port. Ensure to screw tightly.
6
Insert the direct drain hose firmly into the connector
to avoid leaking. (Maximum hose length 5m)
7
Insert the pump drain hose firmly into
the pump drain port. (Bottom right)
8
Plug the unit into an electrical socket outlet with
earth connection. Do not plug to a multiple socket
outlet that is being used for other electrical appliances.
When first using the dehumidifier, operate the unit
continuously for 24 hours. Make sure the plastic cover
of the continuous drain hose outlet is installed properly
so there are no leaks.
Note: The dehumidifier will not start unless the set humidity is lower
than the ambient humidity. It is recommended in normal conditions
to set the humidity between 45-45%.
QUICK-START GUIDE
FOR DEHUMIDIFIERS:
DDR050BJPWDB | DDR050BJPWDB-6
POWER THE DEHUMIDIFIER
