5
OPERATING INSTRUCTIONS
Important:
If the appliance is
placed on its back or side for
any length of time during this
process, it must be allowed
to remain upright for 6 hours
before plugging it in to
avoid damage to the internal
components.
DOOR REVERSAL INSTRUCTIONS
If you fi nd the direction of opening the door on your appliance inconvenient, you can change it by
following the steps shown below. To avoid personal injury or property damage, we recommend that
someone assist you during the door reversal process.
1. Remove the three (3) screws from the back of the worktop, lift the back of the worktop slightly and pull
the worktop forward, this will remove the worktop. See Figure 1.
2. Remove the left or right door strip cover (depending on which side you are moving the door to) and
the left or right hinge cover, then remove the two (2) upper hinge screws and remove the upper hinge.
Loosen the upper door spindle and remove the door assembly. See Figure 2.
3. Remove the hinge pin from the door, move it to the other side of the door. See Figure 3.
4. Install the upper door spindle to the opposite side of the upper hinge, place the upper hinge onto the
other side of the cabinet, install the door strip cover and the hinge cover to the opposite side of where
you removed it. See Figure 4.
5. Loosen the adjustable foot and remove the two (2) screws around it. Remove the two (2) bottom hinge
screws, remove the bottom hinge. Reinstall the foot and two (2) screws 0where the bottom hinge used to
be. Install the bottom hinge where the foot used to be. See Figure 5.
6. Make necessary adjustments to the upper hinge and bottom hinge, reinstall the worktop in reverse
order of removing it.
