LOCATION
• Two people should be used when moving the
appliance.
• Remove interior and exterior packaging prior to
installation. Wipe the outside of the appliance
with a soft, dry cloth and the inside with a
lukewarm wet cloth.
• Place the appliance on a fl oor that is strong
enough to support it when it is fully loaded.
• Do not place the appliance in direct sunlight or
near sources of heat, such as a stove or heater,
as this can increase electrical consumption.
Extreme cold ambient temperatures may also
cause the appliance to perform improperly.
• Do not use the appliance near water, for
example in a wet basement or near a sink.
• This appliance is intended for household use
only. It is not designed for outside installation,
including anywhere that is not temperature
controlled (garages, porches, vehicles, etc.).
• Before connecting the appliance to a power
source, let it stand upright for approximately
6 hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.
• This appliance is 52.7 cm (20.8 inches) wide
by 84.7cm (33.4 inches) high by 54.1 cm
(21.3 inches) deep. Make sure that you leave
the minimum amount of space between the
appliance and all surrounding walls and vents.
• Allow 12.7 cm (5 inches) of space between the
back, sides and top of the appliance and all
adjacent walls.
• This appliance is intended for free-standing
installation only and is not intended to be
built into a cabinet or counter. Building in this
appliance can cause it to malfunction.
3
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
FEATURES
1. Slide Out Glass Shelves:
Shelves can be
arranged on any of the rails inside the
appliance. To remove a shelf, lift up the front
part and pull it out. Perishable foods should be
stored towards the rear of the shelves.
2. Door Liner:
The door liner consists of various
shelves or holders used for storing eggs, cheese,
butter and yogurt as well as other smaller
packages, tubes, cans etc. The lower shelf is
used for storing large bottles.
3. Defrost Water Outlet:
The interior of the
refrigerator is cooled with a cooling plate
mounted in the rear wall. Under the plate there
is a channel and an outlet for defrost water.
Regularly check the defrost water outlet and the
drain channel for blockage. They should always
be kept free and clear of food particles. If the
drain outlet does become clogged, use a plastic
straw or pipe-cleaner to clear it.
4. Bevy Box:
Instead of a crisper, this unit includes
a Bevy Box for the storage and transportation of
canned beverages of 355 ml size.
