9
The display always shows the room
temperature except when setting the
Set temperature or the delay timer.
Light indicates the unit
is in the temperature or
delay time Set mode.
Power
Auto
High
Med
Low
Cool
Energy Saver
Fan only
Set
Temp/Delay
Delay
1-24hr
Fan
Speed
Mode
Light indicates the
delay timer is set.
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Delay timer
Increase.
Auto Fan on
Fan speed
Increase
Unit power
on/off
AIR CONDITIONER CONTROLS
REMOTE CONTROL
Operating Instructions
AIR CONDITIONER
USE
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT
If you turn off the air conditioner, wait at least 3 minutes before
turning it back on. This prevents the air conditioner from blowing a
fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode when
outside temperature is below 65°F (18°C). The inside evaporator coil
will freeze up, and the air conditioner will operate properly.
NOTE:
In the event of a power failure, your air conditioner will operate at
the previous settings when the power is restored.
DIGITAL CONTROLS
Lights next to the touch pads on the air conditioner control panel
indicate the selected settings.
Power Pad
Turns air conditioner on and off. When turned on, the display will
show the room temperature.
Display
Shows the room temperature or time remaining on the Delay timer.
Shows the Set temperature while setting the temperature in Cool or
Energy Saver modes. The Set light will turn on while setting.
NOTE:
The display will change to show the room temperature after
settings have been made. To change the Set temperature, press the
Temp increase
or decrease
buttons
Temp Increase
/ Decrease Pads
Use to set temperature when in Cool or Energy Saver mode.
The Set light will turn on while setting.
Delay Timer Increase
(+) /Decrease (–) Pads
Each touch of the Increase / Decrease pads on the unit or the
In / Decrease – pads on the remote control will set the delay
time when using the Delay 1–24hr timer ( ). The Set light will turn
on while setting.
Fan Speed Buttons
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit.
NOTE:
On the remote control, use the fan speed
In /
Decrease – pads
to set the fan speeds to
Low, Med or High.
Use
the
Auto
pad to turn
Auto
fan on.
Mode Button
Use to set the air conditioner to
Cool, Energy Saver
or
Fan Only
mode.
Delay Buttons
Delay ON—
When the air conditioner is off, it can be set to
automatically come on in 1 to 24 hours at its previous mode and
fan settings.
Delay OFF—
When the air conditioner is on, it can be set to
automatically turn off in 1 to 24 hours.
How to set
Press the Delay 1–24hr pad on the unit or the ( ) pad on the
remote control. Each touch of the
Increase
/
Decrease
pads
on the unit or the
In / Decrease –
pads on the remote
control will set the timer in 1-hour intervals. The Set light will turn on
while setting.
To review the remaining time on the Delay 1–24hr timer, press the
Delay 1–24hr pad on the unit or the ( ) pad on the remote
control. Use the
Increase
/ Decrease
pads on the unit or
the
In / Decrease –
pads on the remote control to set a new
time if desired.
During preview of timer or timer setting, press
Delay 1-24hr
button
on the panel or
Delay
button on the remote controller to cancel the
timer setting.
