24
GEAR UNITS WITH “D” TYPE SHAFT
Dana Incorporated
IMM-0005EN Posiplan (MT-5215-0806)
Securing:
unscrew the threaded rod nut (pos. 4) and take it out of its seat. Replace the rod (pos. 4) with screw (pos. 6), torquing it down
fully to the torque value shown in "Values Table Torque Setting Bolts p. 32", using an intermediate threadlocker. Dana Incorpo-
rated recommends LOCTITE 601.
For instructions on how to secure the coupling, see section "Assembly with coupling p. 17" (see Fig. 20).
Disassembly:
the first thing to do is remove the coupling. For instructions on how to do this, see section "Disassembling the coupling. p. 18".
Disassembling the coupling. Remove the anchor bolt (pos. 6) and the backplate (pos. 8) from their relative seats.
Insert 2 bolts (pos. 7) into the two threaded holes on the backplate (pos. 3) and screw them until they touch the machine shaft
(pos. 1). Now give them alternately one full turn each (see Fig. 21).
Fig. 19
Fig. 20
Fig. 21
1
2
9
3
4
5
8
3
8
6
9
3
7
5
