Dan Dugan Sound Design E-2, Руководство пользователя

Страница: 40 / 68

Dugan Model E-2 User Guide
40
Level Indicator
Each channel has a
level
LED that lights green when the audio level is adequate for
automatic mixing. It should remain green when no one is talking.
• If the
level
indicator blinks, raise the console’s channel input gain, and/or move
the
+4/-10
switch on the rear panel to
-10
.
• If the
level
LED lights red, lower the console’s channel input gain and/or move the
+4/-10
switch on the rear panel to
+4
until it stays green at all times.
Bypass
When
bypass
is active, the signal passes through without A/D and D/A conversion or
automixing. A bypassed channel appears inactive, with all lights extinguished.
Figure 5-4
bypass
button lit
Man
and
bypass
modes are similar:
•
bypass
makes an instantaneous transition, which can cause an audible click. It is
a hardware bypass and therefore has no signal latency.
•
man
performs a quick fade without sonic artifacts. It has the same signal latency
as
auto
mode.
Since analog channels 1–12 are bypassed when the power is off, it is not necessary to
unpatch the Model E-2 if not in use.
To deactivate
bypass
, you can:
• Click
bypass
again;
- OR -
• Click any of the three channel mode buttons.