Flexi hose
Cabinet
Centre line
USER GUIDE
• Shake excess water from hands
• Place hands under the dryer to turn it on
• Place your hands approx. 10-15 cm under the unit
• Move your hands slowly through the airflow from your wrists to finger tips
to make the water roll off your hands
• The dryer stops automatically when hands are moved away
CLEANING AND MAINTENANCE OF CABINET/MOTOR
• Cut the power
• Unscrew (2) bottom security screws
• Remove cabinet front
• Clean the cabinet inside and remove dust/dirt. Compressed air can be used
• Do not rinse with running water
• Use a damp cloth and mild cleaning solution. Never use cleaning detergents with an
abrasive effect
• Replace cabinet front and tighten screws. Ensure not to overtighten screws
INSTALLATION HEIGHT
RECOMMENDATION:
Tolerance for position of flexi hose from
centre line ±2 cm. If tolerance, for any
reason, deviates more than ±2 cm on the
determined installation position, it must
be ensured that the hose is not bent or
curved.
A bent or curved hose can cause reduced
air velocity and air volume.
CLEANING AND MAINTENANCE
Routine cleaning and maintenance is recommended every 12 months. This may be
required more frequently depending on the local conditions.
Carbons brushes are wearing parts and need to be checked more often to prevent damage
to the motor.
CLEANING AND MAINTENANCE OF TAP/SENSOR
• Do not rinse with running water
• Use a damp cloth and mild cleaning solution. Never use cleaning detergents with
an abrasive effect
• Clean sensor for dust and dirt to prevent unintentional activation
LIGHT INDICATOR
Standby
Solid red light
Active
Light changes from blue to red
10
11
