Dan D'Agostino MLife, Руководство пользователя, Страница: 7 / 30

D’Agostino MLife manual / page 7
The MLife is designed with special cone feet that screw into the bottom of the main
chassis and match up with indentations on the top of the power supply. The bottom of
the power supply has soft feet designed to isolate the main chassis assembly from
vibration. (These feet will not stain or mar the surface underneath them.)
To attach the cone feet, first remove the vinyl wrap that covers the amplifier and protect
the finish. (Save the vinyl wrap in the box to use again if you ever need to ship the
amplifier.) Use two people to turn the integrated amplifier chassis upside down and
place it on a soft but secure surface—a few towels draped over a sturdy table, for
example—and place the vinyl wrap atop the towels for extra protection. Screw the feet
all the way into the threaded holes on the bottom of the chassis. Now place the power
supply in the place where you want to install the MLife. Use two people to turn the
integrated amp back over again. Place it carefully atop the power supply chassis, lining
up the points of the cone feet with the indentations on the top of the power supply.
If you need to return the amplifier for service
If you should need to send the MLife back to us for service, be sure to use the original
box and materials for shipment.
Before you ship the amplifier, unplug it from the wall and let it cool down for 6 hours. To
protect the finish during shipping, rewrap the amplifier in the vinyl covering it came in.
Make sure the amp is completely cool and has not been plugged in for 6 hours before
you do this. Wrapping the amplifier when it is warm will cause the vinyl to leech into the
amplifier’s surface and will permanently damage the finish.