Dan D'Agostino MLife, Руководство пользователя, Страница: 22 / 30

D’Agostino MLife manual / page 22
Basic operation from the front panel
Initial power­up of the MLife
To power­up the MLife, press the Standby button located on the front panel (or the one
on the Momentum app).
After power is switched on, the MLife requires approximately 30 minutes to reach
optimal operating temperature. Although the amp will sound excellent upon initial
listening, the sound quality will improve as it warms up, much as the flavor of a fine red
wine improves if it is allowed to breathe for a few minutes.
Basic operation
Operation from the front panel is simple but here’s a brief description if you need it.
Standby: The Standby button is located on the front panel of the MLife. When the unit is
in standby (off) mode, the LED in the middle of the button will be lit. Push the button to
turn the unit on. When power is on, the LED in the middle of the button will go off and
the volume indicator will illuminate. Push the button once more to turn the unit off. The
light for the volume indicator will go out and the LED in the middle of the Standby button
will light up.
Volume: Turn the ring around the volume indicator clockwise to raise the volume and
counterclockwise to lower it, or use the /­ buttons on the remote. The needle
indicator will move toward the right as you increase the volume and to the left as you
decrease it. We recommend you turn the volume down when you initially power up the
system, and raise it only when you are assured that all components in the system are
operating properly. You can also adjust volume through the Momentum app.
Source selection: Simply push the front­panel button or remote button that corresponds
with the source you want to hear. The LED in the middle of the front­panel button for the
currently active source will light up. To access different streaming options, press the
Stream button on the Momentum app to access the Stream page.
Theater: By using the Theater input, you can interface the MLife with a multichannel
home theater audio system. To use it, connect the left­ and right­channel outputs of
your surround­sound processor to the MLife’s Theater input. This input bypasses the
volume control; use your surround­sound processor’s volume control instead. Push the
Theater button on the front panel or remote when you want to listen to surround sound.
Push any other source button to return the system to stereo mode.
Headphone: Press this to activate the headphone output and mute the speakers. Press
it again to restore sound to the speakers. The Mute button in the app will not function
when headphones are used.