JUPITER
20
Installation of concealed hygienic mixer with shelf
1. Disconnect your water supply system.
2. Make sure the installation niche has right size. Important! Make sure to connect the hot/cold
inlet pipe correctly (If standing in front, hot water pipe connecting to the left& cold water pipe
connecting to the right).
3. Make sure the direction of installation of distance to finish surface is correct by preliminary
installtion of mixer body to the wall. Screw which is fixing shelf at the mixer body has to be located
at the bottom.
4. Fix the body of mixer horizontally by using special tools.
5. Connect the body & water supply pipe with water inlet pipe.
6. Keep the protective plate fixed to the body. Start the water supply system and make sure that all
connections are tight. Perform additional connections tightening and sealing if necessary.
7. After decorative and finish works are done, take off the protective plate and attach fitting with
rubber sealings to the body by using 4 screws.
8. Before mixer use, open water supply system to make sure water is clean.
9. After checking the water system has no pollution, install shelf to the body with fitting and fix
shelf by using screw at the bottom of housing.
10. Install hygienic spray by using hose.
Warning!
Screw (-s) and dowel (-s) for wall mount are not included. Estimate the loading capacity
of the wall in order to make sure it can keep the loading. Use screw (-s) and dowel (-s) suitable for
materials of the wall in your house. Should you have any doubts or questions, please consult your
supplier. Carefully read the manual and follow its recomentations.
Care recommendations
Modern plumbing equipment, kitchen and shower faucets are made of a variety of materials
depending on the functional features and design that are in demand in the market. To avoid damage
when cleaning take certain criteria into account.
Mixer care products
Cleaning agents are required to remove lime deposits.
Follow these rules during cleaning:
1. Never use products containing hydrochloric, formic or acetic acid, as they can cause significant
damage.
2. For the same reasons, it is recommended to use phosphoric acid on a limited scale.
3. Never mix different cleaning products.
4. Never use abrasive cleaners or devices (for example, some cleaning powders and microfiber
sponges).