JUPITER
19
Installation of basin mixer
1. Turn off the water system.
2. Attach a flexible connection to the mixer.
3. Important! Screw the flexible eyeliner into the body of the mixer only manually, without any tools
and excessive force to avoid damage.
4. Secure the mixer to the sanitary fixture using the supplied hardware.
5. Connect the flexible supply pipe to the water supply system: the right supply hose to the cold
water supply, and the left one - hot.
6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the first water start.
7. Turn on the water supply system, check tightness of all connections when the mixer is closed.
If necessary, tighten and seal the connections.
8. Open hot and cold water supply for a while, then close water supply and install (twist) the
aerator in place.
9. For mixer with swivel spout. In order to avoid water leaking during usage, please ensure the
bottom portion of body is tight up safely and spout can rotate with some effort.
Installation of bath/shower mixer, bath and shower mixer with
long spout and shower set, and shower mixer
1. Turn off the water system. Screw eccentric adapters into the pipes of water supply system,
having previously sealed the threaded part with an insulating material. Select position of the
eccentric adapters, where they coincide and correspond to the connecting position of the mixer.
The mixer should be placed horizontally.
2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the first start-up of water.
3. Install decorative sockets on the eccentric adapters and, using a tool with soft lining, attach the
mixer body. Screw the spout for the bath/shower mixer with long spout.
4. Turn on the water supply system, check tightness of all connections when the mixer is closed.
If necessary, tighten and seal the connections.
5. Open hot and cold water supply for a while, then close water supply and install (twist) the
aerator in place.
6. For a bath/shower mixer with long spout and shower set, attach the shower head to the hose
using gaskets from the kit. Connect the hose to the shower outlet on the faucet body. Install the
wall shower holder in a place convenient for you.
