Damani DOFF6.3SS, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 20

Semi-automatic cooking
A. Programming the cooking time.
B. Programming the end of cooking time.
A) Set the desired cooking time using the “2” button.
Cooking will start immediately, and the display will show the «AUTO» and “2” symbols.
When the programmed time has expired, cooking will stop, and an intermittent signal will sound. You can stop
the signal as described above.
B) Set the desired end of cooking time using the “3” button.
Cooking will start immediately, and the display will show the «AUTO» and “2” symbols. At the established time,
cooking will stop, and an intermittent signal will sound. You can stop the signal as described above. It is possible
to view the programming status at any time by pressing the corresponding button. You can also cancel
programming at any time by pressing the “2” button and setting the display to zero.
Then by pressing the “4” button, the oven will switch to manual functioning.
Electronic signal
The function of the «timer» consists simply of a buzzer which can be set for a maximum period of up to 23 hours
and 59 minutes.
To set the timer, press the “1” button and at the same time “+” or “-“ until the display shows the desired time.
When setting is complete, the clock will once again show on the display along with the “1” symbol.
The countdown will begin immediately and can be seen on the display at any time, by simply pressing the “1”
button.
After the set time has expired, the “1” symbol will go off and a buzzer will sound, which you can shut off by
pressing the “1 ” button.
ATTENTION!
A power outage will cause deletion of programmed functions, including the clock. Once you have turned the
power back on again, three intermittent zeroes will appear, and you can re-program.
9