Owner’s Manual
Dalton Medical Corp. www.daltonmedical.com
15
4.3 ASSEMBLING AND DISASSEMBLING
The scooter can be disassembled into five sections without tools: the seat, basket, battery pack, front
and rear section. Please be sure to follow these steps to properly assemble and disassemble your
scooter.
■
Assembling The Scooter (Seat Swivel Base Assembly is Optional)
No tools are required to disassemble or assemble your scooter.
1.
Place the freewheel mode lever in the drive position.
2.
Set the rear section in the up position and make sure the hook for the front section is
connected to the axle of the rear section.
3.
Put down the front and rear sections until the scooter is in locked.
4.
Set down the battery pack on the scooter, and make sure it is in the correct position.
5.
Set down the seat on the seat post until the swivel lock engages and you hear a click.
6.
Turn key switch to “ON”. Make sure battery gauge indicates sufficient power.
■
Disassembling The Scooter
The SC-S2454 can be disassembled in to five pieces, the seat (7.21 kg / 15.9 lbs), basket, the front
section
(
15.74 kg / 34.7 lbs), the rear section
(
10.69 kg / 23.5 lbs) and battery pack
(
9.18 kg / 20.2 lbs).
Please follow the steps. (Seat Swivel Base Assembly is Optional)
1.
Make sure the tiller is raised before reassembling the scooter.
2.
Turn key switch to “OFF”.
3.
Place the free wheel mode lever in the drive position.
4.
Take off the basket.
5.
Push the Seat Rotate Lever while pulling up on the seat to remove.
4 . O P E RAT I O N
Warning
To avoid personal injury, ask for
assistance when necessary while
disassembling or assembling your scooter.
