daltile 816 BrS Скачать руководство пользователя страница 8

DALTOOL SAFETY

The use of saws and drills generates dust. Excessive airborne particles may cause irritation to eyes,
skin and the respiratory tract. To avoid breathing impairment, always us dust controls and protecti-
on suitable to the material being sawed or drilled; 
See OSHA (19 CFR Part 1910.1200). Diamond Blades improperly used are dangerous. Comply with
American National Standards Institute Safety Code, B7.1 and, Occupational Safety and Health Act
covering speed, Safety Guards, Flanges, Mounting Procedures, General Operating Rules, Handling,
Storage and General Machine Conditions.

CALIFORNIA PROPOSITION 65 MESSAGE: 

Some dust created by power sanding, sawing, grinding and other construction activities contain
chemicals known [to the State of California] to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:

Lead, from lead-based paints

Crystalline silica, from bricks and cement and other masonry products

Arsenic and chromium, from chemically treated lumber

For Further information, consult the following sources:

http://www.osha-slc.gov/sltc/sillicarystalline/index.html
http://www.oehha.org/prop65/out_of_date/6022kLstA.html

Your risk from these exposures varies depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially designed to filter out microscopic particles.

PAGE 8

DALTILE 828 BrS OPERATING MANUAL   V02/2004R1

828  28-10-2004  09:47  Pagina 8

Содержание 816 BrS

















Отзывы: