Dalsa Spyder 3 GigE SG-10-01k40-00-R, Руководство пользователя

Страница: 58 / 121

Spyder 3 GigE User Manual
03-032-10158-09 DALSA
58
A1.3 Setting the Bit Depth and Data Mode
Purpose: Selects the camera’s bit depth, number of taps, and data rate.
Syntax:
sdm i
Syntax Elements:
i
Camera bit depth. Allowable values are:
For SG-10-01K40 and SG-10-02K40
0 =
8 bits, 1 tap, 40MHz data rate
1 =
12 bits, 1 tap, 40MHz data rate
For SG-10-01K80 and SG-10-02K80
2
= 8 bits, 2 taps, 80Mhz data rate
3
= 12 bits, 2 taps, 80MHz data rate
Example:
sdm 0
A1.4 Exposure Mode, Readout Mode, Line Rate and
Exposure Time
Overview
You have a choice of operating in one of seven modes. The camera’s line rate
(synchronization) can be generated internally through the software command
ssf
or set
externally with an EXSYNC signal, depending on your mode of operation. To select how
you want the camera’s line rate to be generated:
1. You must first set the camera mode using the
19H
sem
command.
2. Next, if using mode 2, 7 or 8 use the commands
20H
ssf
and/or
21H
set
to set the line rate and
exposure time.
Setting the Exposure Mode
Purpose: Sets the camera’s exposure mode allowing you to control your
sync, exposure time, and line rate generation.
Syntax:
sem i
Syntax Elements:
i
Exposure mode to use. Factory setting is
7
.
Notes: •
Refer to
284H
Table 11: Spyder 3 GigE Exposure Modes for a quick
list of available modes or to the following sections for a more
detailed explanation.
•
To obtain the current value of the exposure mode, use the
command
22H
gcp
or
23H
get sem
.
Related Commands:
24H
ssf
,
25H
set
Example:
sem 3