Dalsa Pantera DS-21-01M60, Руководство пользователя и справочник

Страница: 59 / 62

Pantera 1M60 and 1M30 User’s Manual 59
DALSA 03-032-10033-09
Appendix D
Manual Revision History
The following table summarizes changes made to this manual. The latest manual
revisions can be obtained at
http://vfm.dalsa.com/docs/docs.asp .
Table 20: Manual Revision History
Revision Number
Change Description
Rev 00 Preliminary manual release
Rev 01 Updated the mechanical drawing on page 21 and the
camera size spec in Table 2 from 91x91x39 to 93.9 x 93.9 x
41.2.
Rev 02 Manual updated to include 1M30, new mechanical
drawing, software command updates, new image sensor,
and temperature vs performance graphs.
Rev 03 Updated dynamic range from 68dB to 66dB, 2600:1 to
2057:1 SAT nom value from 3952 to 3900 Deleted SEE and
NEE values. Were incorrect and need to be determined.
Updated Table 8 and added Table 9 with new binning vs
speed values.
Rev 04 Added Pantera branding to manual. Removed "pending"
from Regulatory Compliance in spec table and in EMC
Declaration of Conformity. Updated Responsivity graph
on page 9 from sensor responsivity to camera
responsivity. Updated maximum frame rate with
exposure control enabled to 57.5fps. Was 57fps. Tables 8
to 11- Binning vs Speed. Values have been updated.
Figures 11 to 16- Pictures have been updated. Table 15 to
18, page 46-Camera Link Timing values have been
updated.
Rev 05 Changed set gain mode command from
gnm
to
gm
in
section 3.9 and All Available Commands table in
Appendix B. Microcode was changed.
Rev 06 On page 8, removed the “DC Offset Subtraction” line. Not
available in camera. In Specifications table, section 1.3
updated responsivity specification from 24 DN/(nJ/cm2)
to 40 DN/(nJ/cm2). Updated Figure 2: Responsivity with
same change. Tables 8 to 11- Binning vs Speed. Values
have been updated again. Tables 14 to 17, Camera Link
Timing, updated with new numbers. Updated Colorado