Dalsa Falcon 1.4M100 XDR Monochrome, Руководство пользователя

Страница: 84 / 95

DALSA Falcon XDR and HG Series Camera User's Manual
84 Appendix B: Error Handling and Command List
Syntax Command Params Description
sdc
Set digital color
gain
t i Allows user to manually set digital color gains for
individual colors. The allowable range is
1
to
4
.
1 = Red,
2 = Green (Red),
3 = Green (Blue), and
4 = Blue.
Minimum = 1024
Maximum = 8191
sdo
set digital offset
t i
Set the digital offset as a DN, which is added to the digital
video signal.
t : tap selector: this is always 0 (all taps)
i : the digital offset (0-1023 DN)
sem
Set exposure
mode
m
Set the exposure mode. Available values are:
2
: Internal SYNC, programmable frame rate and exposure
time using commands
ssf
and
set.
4
: Smart EXSYNC.
6
: External frame rate, fixed exposure time
9
: Sequential Smart EXSYNC.
10
: Sequential external frame rate, fixed exposure time
set
set exposure
time
f
Sets the exposure time to a floating point number in µs.
Allowable range is
250-4194303
µs.
sfc
Set FPN
Coefficient
x y i
x = 1-1400
y = 1-1024
i = 0-255
slc
set LUT
coefficient
i i
Specifies the LUT input pixel value and output value. All
other pixel values are then calculated linearly.
i :Input pixel value. Possible values are 0-1023 .
i : Output pixel value. Possible values are 0-1023 .
sle
set LUT enable
i
Enables or disables the camera LUT.
0 : LUT disabled
1 : LUT enabled