Dalsa Falcon 1.4M100 XDR Monochrome, Руководство пользователя

Страница: 59 / 95

Falcon XDR and HG Series Camera User's Manual DALSA
Serial Interface: How to Control the Camera 59
Resetting the Current Pixel Coefficients
Purpose: Resets the current user coefficients to zero. This command
also resets saved coefficients to zero, resulting in raw video
without correction being output from the camera.
Syntax: •
rpc
Notes: The
rpc
command is not available when the camera is using
the factory calibrated coefficients (
csn 0
). You must select
the user coefficient set (
csn 1
) before you can reset pixel
coefficients. An error message is returned if you attempt to
reset pixel coefficients when using
csn 0
. To return the
current
csn
number, send the command
get csn
.
3.10 Gain Adjustments
3.10.1 Factory Calibrated Analog Gains
The camera has a factory calibrated analog gain setting. Adjustment of analog gain is not available to the
user, however, digital gain is available using the set system gain serial command,
ssg
.
3.10.2 Setting Digital System Gain for Monochrome Cameras
Serial Command: ssg
Purpose: Increases the overall gain of the camera.
Improves signal output swing after a background subtract.
When subtracting a digital value from the digital video
signal, using the
ssb
command, the output can no longer
reach its maximum. Use this command to correct for this
where:
ssg value =
max output value
max output value - ssb value
Syntax: •
ssg t i
Syntax Elements: •
t