Dalsa Dalsa DS-4x-06M18, Руководство пользователя и справочник

Страница: 23 / 42

6M18 Camera User’s Manual 23
DALSA 03-32-10017-03
3.3 Control Register Reference
A number of functions and modes depend on the control register settings. These settings are
detailed in the following sections.
The “Write Control Register” command is used to write a register that controls specific camera
triggering and test functions. This command must be followed by a data byte with bits defined as
shown in the following table.
The “Read Control Register” command allows interrogation of the camera to determine current
configuration of the control register.
Table 15: Control Register Bit Definitions
Register Write
Command Read
Command Bit Function Default
Reset 80h NA 7:0 Resets all registers to
default values NA
Camera
Type NA C3h 7:0 Read camera type 4Dh
Firmware
Rev NA C5h 7:0 Read firmware
revision Fxh
7 Integration Mode
0=Internal
1=External 0
6:4 Always 0 00
3 Trigger Mode
0=Internal
1=External 0
2 Flush Before
Integrate
0 = Charge is flushed
between frames
1 = Flushing disabled
(bit [7] must =1) 0
1 Always 0 0
Register 1 82h C2h
0 Serial Syn Bit 0