Only use this unit if it is technically in proper working order, to the intended purpose and while keeping safety and potential dan-
gers in mind.
Qualified Personnel
Installation, mounting, connection, commissioning and configuration of the unit may only be carried out by qualified person-
nel. This also applies to the maintenance, testing and repair, whereat the regulations of the DIN VDE 0701 series of standards
(repair, modification and inspection of electrical appliances) must be followed.
Regulations
The use of video and audio surveillance systems in general is strictly regulated. Inform yourself about the applicable laws and
regulations regarding data, working and environmental protection before using the unit and ensure compliance with them.
System Components
Only use internal components that have been tested and approved by Dallmeier. Inappropriate internal components can
cause malfunctions, damages and data loss and can result in loss of warranty.
RAID System
Devices that are configured with a RAID system for redundant recording always must be supplied with power via an uninter-
ruptible power supply (UPS). A sudden voltage drop can damage the RAID system.
Modifications
Do not make any modifications to the hardware or software that has not been tested and approved by Dallmeier. Inappropri-
ate modifications can cause malfunctions, damages and data loss and can result in loss of warranty.
Documentation
Carefully and completely read the documents included in delivery. Always observe the contained instructions, notes and
warnings.
Condensation Water
If the unit is brought from a cold to a warm environment, resulting condensation water can cause malfunctions and damages.
In this case wait (up to 8 hours) until the unit has reached room temperature before commissioning.
Operating Conditions
Unfavourable operating conditions can shorten the life of the unit and can cause malfunctions, damages and data loss and
can result in loss of warranty. Observe the specifications given in the technical data, the operating condition requirements
and the maintenance instructions.
Shocks
Shocks can cause malfunctions and damages. The unit may not be moved while in operation.
Foreign Objects
If objects or liquids get into the unit immediately disconnect it from the power supply (pull out the power plug). Contact the
sales partner responsible for your area.
Burnt Smell
If you notice burnt smell or formation of smoke from the unit immediately disconnect it from the power supply (pull out the
power plug). Contact the sales partner responsible for your area.
Opening
The housing of the unit may only be opened by qualified personnel for inspection, maintenance and repair.
Disposal
Disconnect the unit from the power supply. Remove all connected devices. Return the unit to your respective sales partner.
Safety instructions
3
Saf
ety
H
DD-Moun
ting
Moun
ting
Login
C
onnec
tions
Dimensions
