DMX 2400
www.dallmeier.com
9
The graphical configuration interface of the recorder is displayed.
Fig. 3-2
Make the required settings (see below).
3.2
Remote Login
After the start (up to about 5 minutes) the recorder is ready for remote configuration over
the network with the software
NetConfig2
.
Start the
NetConfig2
software.
The
NetConfig Login
dialogue is displayed.
Fig. 3-3
Set the required
Mode
.
Enter the required
IP address
.
Enter the required
Password
.
Confirm with
Login
.
The connection to the recorder is established.
