DMX 2400
www.dallmeier.com
27
NOTICE
Risk of injury by sharp edges!
Be careful when removing and installing the power supply module.
Pull the power supply module out of the housing.
Take care not to cant.
Do not use any force.
WARNING
Serious danger by electric shock!
Do not grip to the open shaft of the power supply module.
Insert no tools in the open shaft of the power supply module.
Place the new power supply module with the guide rails in the housing.
Fig. 8-6
Slide the power supply module carefully and completely into the housing.
Take care not to cant.
Do not use any force.
Attach the power supply module with the two screws at the top.
Connect the power cable.
Turn on the new power supply module with the appropriate power switch.
The power supply module is put into operation automatically. The device is powered from
the redundant power supply modules with equal parts of tension.
