28
IPS 10 000 – Firmware Versions 10.7.X| REV. 1.0.0 | © 2021 Dallmeier
Fig. 7-7
▶
Place the new power supply module with the guide rails in the housing.
▶
Slide the power supply module carefully and completely into the housing.
▶
Take care not to cant.
▶
Do not use any force.
▶
Attach the power supply module with the two screws at the top.
▶
Connect the power cable.
▶
Turn on the new power supply module with the appropriate power switch.
The power supply module is put into operation automatically. The device is powered from the redundant
power supply modules with equal parts of tension.
