dallmeier SDF5450HD-DN, Руководство по вводу в эксплуатацию

Страница: 24 / 56

24 Rev. 1.0.0 | © 2019 Dallmeier | www.dallmeier.com
SDF5450HD-DN Commissioning
8 Installation and Commissioning
The installation and commissioning of the device may only be carried out by quali-
fied personnel.
The following tools/accessories are required for the installation of the device:
• Torx screwdriver with hollow point (T20 H) or equivalent tool for
tamper-resistant 6-lobe security screw with pin (Torx-TR 20)
• Circular rubber gasket for housing base
• PG16 cable gland with suitable sealing insert
• Drilling template, marking tool (e.g. center punch or awl) and electric drill
• Three mounting screws (Ø 4 mm) and suitable screwdriver
WARNING
Personal injury caused by falling device or collapsing supporting structure
Risk of death or serious injury to the head
➡ Before installing the device, follow the manufacturer’s instructions regarding
the maximum permissible carrying capacity of the supporting structure.
➡ To mount the housing base, only use screws and, if necessary, dowels that
are suitable for the ceiling/wall type and construction material, such as for
example:
• Plastic screw anchors for use in solid masonry materials (concrete/brick)
• Gravity or spring toggle anchors for use in drywall systems (plasterboard)