Panomera® S4/8
Installation of an Panomera® Air Blast Kit on a Panomera® S4/8
© 2021 Dallmeier electronic V1.2.0 2021-01-14 6/6
Put the Mountera® Plug back in place
and tighten the screws with a Torque
wrench fixed to 14.4 Nm.
Reinsert the locking ring and
let it snap into place.
Mount the cover system on the
housing and tighten the screw.
Insert and tighten the air coupling valve
for the air hose to the compressor.
NO
TE:
Select the angle valve or vertical valve that
you want to use on site for the connection.
A
lternative:
