Panomera® S4/8
Installation of an Panomera® Air Blast Kit on a Panomera® S4/8
© 2021 Dallmeier electronic V1.2.0 2021-01-14 5/6
Insert both air hoses firmly into the
valve openings.
A
TTENTION:
Test the connection with a light pull. If the
connections are too lightly inserted, air may
escape into the housing.
Place the sealing ring on the screw of the
compressed air coupling.
A
TTENTION:
The rubber nose of the sealing ring
should rest on the two cable valves.
Put the camera cover back on the camera
and tighten the screws.
