DIS-2/M StreamerPro HDD Large UTP
54
Dallmeier electronic
11 Saving the configuration
The configuration of a module can be exported as a file and thus backed up.
In addition to re-establishing an individual module, the configuration can also be transfer-
red to several modules simultaneously.
11.1
Saving the configuration file
¾
To transfer and save the configuration save on the
configuration PC, click on Config File > Save.
You can decide which configuration groups should be included
in the backup In the Config File Management dialog.
IMPORTANT
If you wish to transfer the configuration at a later date to several
devices, you must not save the Network settings configuration
group.
IMPORTANT
If you wish to transfer Track settings, Encoder settings and
Video standard to a module which originally had different
settings in these areas, the module’s images or tracks must be
deleted.
¾
Click on OK after the selection has been made.
Follow the instructions in the download dialogs and save the configuration file. The
configuration file is a plain text file. The file name contains the IP address of the relevant
module.
Fig. 11-1