DIS-2/M StreamerPro HDD Large UTP
53
Dallmeier electronic
10.5
Video settings
The Video settings dialog allows the way in which the incoming video signal is processed
to be adjusted. The settings affect stored and output pictures.
¾
Open the Video settings dialog by clicking on Video ….
Encoder 1 is used as standard for
recording. It is therefore set
permanently as the Input.
¾
Set the relevant video input as the
Source.
¾
Make the required settings using
the sliders.
¾
Set the volume of the audio signal
for the recording using Audio
gain.
¾
Finally confirm with OK.
NOTE
You can return the device to its default values using Standard.
Fig. 10-26