1
www.supercircuits.com
ATX-GSM_RQ
Using the ATX-GSM
1.
To charge the DVR, plug the USB cable provided into the USB port on the side of the DVR, then into
a USB port of a computer or the power adapter provided. It will take about 5 hours to fully charge
the DVR.
2.
Insert an active GSM SIM card into DVR. Insert the card with the top of the card toward the back of
the unit, then push the card in until it clicks into place (see the product photo to the left). You can
use either a contracted AT&T™ card or a contracted or prepaid T-Mobile® card (preferred). After
the GSM SIM card is installed, the LED will light green for about 6 seconds, indicating the device is
working.
GSM SIM
card
microSD
card
Back
side
3.
Place a call to the phone number of the installed GSM SIM card. You will be able to hear audio from
the device. In this mode, your ATX-GSM is functioning as a voice monitor.
ATX-GSM GSM Bug – Mini Audio/Video
Recorder Quick Start Guide
The ATX-GSM is a small, digital audio and video recorder (DVR) with remote control using SMS commands
through GSM. It is must useful for live audio monitoring, or audio recording. The product includes the DVR
unit, USB cable and power adapter, and clip, magnetic, and surface mounting brackets. An active GSM SIM
card and micro-SD card (cards not provided) are required to use this product.
Manual
record
switch
LED
USB port
Microphone Camera
GSM SIM*
card slot
microSD*
card slot
DVR front-left side
DVR front-right side
* Shown with cards installed.
