dallmeier DDF4820HDV-DN, Руководство по установке и настройке

Страница: 25 / 103

DDF4820HDV-DN-IM/-SM
www.dallmeier.com 25
Step 4

Connect the required cables to the connectors of the camera module
(see Fig. 5-5 and chapter “ Pin Assignment ” on page 98).

If necessary, connect a CVBS monitor to the video preview output ( Fig. 5-2 ).

If PoE (Power over Ethernet) is not available, first connect the camera to a suitable
power supply unit and then connect the power supply unit to the mains socket.

Align the camera with your scene using the 3-axis mount.

Login to the “WebConfig” user interface of the camera
(see chapter “ Connection and Login ” on page 28).

Click
Lens control …
in the configuration menu of the camera.

Adjust the focal length (zoom) and the focus in the Lens control dialogue box
(see chapter “ Lens Control ” on page 87).

Disconnect the CVBS monitor from the video preview output.

Attach the trim ring to the housing while ensuring that the ambient light sensor is not
covered by the black inner dome cover.

Tighten the 3 housing screws using a T20 torx wrench.
Housing screw
(T20 Torx)
Locked ceiling clamp Locked ceiling clamp
Suspended ceiling
Trim ring with bubble
Fig. 6-5