8
5.4 Keypad Configuration
The keypad on the rear of the unit provides the installer access to:
●
Listen to the current IP address
●
Reset the unit to the factory default settings
●
Reboot the unit.
5.5 Get current IP address
During standby, press ’C’ on the rear keypad to retrieve the current IP address.
5.6 Factory default settings
To default the unit to its factory settings, connect the power (via the power jack or Ethernet PoE
lead). Wait about 20 seconds (You will hear a start-up tone).
You can chose to reset the network settings to static (192.168.1.100) or dynamic (DHCP).
To reset to static, press *#*#7*1.
To reset to DHCP, press *#*#7*2.
This will reboot the unit and will set requested network address mode, with the adminis-trator
(admin) password reset to admin.
5.7 Reboot device
To reboot the device press *#*#7*3.
5.8 Web Interface
The Sentry IP Video Door Station is configured via an integrated administration web server.
The DDC VoIP CAM door station is programmed by logging into the web page.
Use a web browser, enter the IP address of the phone into the address bar at the top of the
screen.
If you do not know the IP address of the phone, press the “C” key on the rear keypad of the unit.
The unit’s voice prompt will tell you the current IP address.
To log in to the programming page type in the name and password and click the Login button,
(units are generally delivered with the default username “admin” and password “admin”).
