5
Counter Up
The Counter Up (CNT UP) allows the pilot to time various auxilary functions. It can be activated and reset at any time.
To use the CNT Up function:
1.
Rotate the Data Knob until CNT UP is displayed. It will initialize on 0.00S if has not been used since
system start up.
2.
To start the CNT Up, press the Power/Mode control pushbutton.
3.
Press the Power/Mode control pushbutton again and the timer will discontinue counting, and hold the
elapsed time.
3.
To start a new timer function press, the Power/Mode control. The CNT UP will reset to zero and begin
counting up.
Counter Up
Counter Down
The counter down (CNT DOWN) allows the pilot to enter a specific time and then be alerted when that time has
expired. This timer is especially usefull for timed approached. When activated, the down time will count down to zero
and then begin counting up. During the counting up phase, the time will be preceded by a plus symbol (+).
1.
Rotate the Data Knob until the CNT DOWN legend is displayed. You will note that the CNT DOWN
time default is one minute and zero seconds.
2.
To program a new time, press and hold the Data knob for three seconds. The second will begin to
blink.
3.
Turn the Data knob to enter the new time. Note that you can program seconds and minutes form the
seconds positon as the time rools over whenever you reach 60 seconds. You can also rotate the Select
knob to the minutes position if desired.
Counter Down
