32
Image setting menu
Automatic enhancement mode:
Click the icon
on the right to turn it on or off.
Hot overlay:
Click the icon
on the right to turn it on or off. When it is turned on, a
temperature value can be set by the threshold value, and only infrared images with a
temperature higher than the threshold value are displayed during thermal
superimposition. In addition, the transparency percentage can be set separately to
change the degree of transparency of the infrared image superimposed on the visible light
image. 0 means opaque, and 100% means full transparency (that is, the superimposed
infrared image cannot be seen).
DSIE Fusion Settings:
Click the icon
on the right side of "Distance Setting
Switch" to turn it on or off. When it is turned on, the fusion distance will be adjusted
according to the laser ranging result; when it is turned off, it stays at the fusion distance of
the last operation.
! Note
: When using a 3x telephoto lens, due to the large gap between the infrared
field of view and the visible field of view, in the picture-in-picture and dual-band fusion
(DSIE) modes, the images of the two cannot be matched. It is not recommended to use
these two image mode at this time.
Zero time setting:
Click the icon
on the right side of "Use preset value" to turn it
on or off. When turned on, you can select long time (180S) or short time (60s) in the
preset value; when turned off, the preset value option is not selectable, and the zero
adjustment interval time value can be set through the custom option.