10
[1] power switch
Used for turning on and off, standby and wake-up of the thermal imager. Press this
switch for more than three seconds to turn on/off the thermal imager; short press to enter
standby/wake up (any other key can also wake up).
! Note
: It is recommended to wait at least ten seconds after turning off the camera and
turning it on again to ensure the safety.
[2] Mode key
Used to switch and zero the image mode. Short press to switch the image mode,
there are 4 image modes to choose from infrared, visible light, picture-in-picture and
dual-band fusion image; long press for 3 seconds to manually adjust the zero.
[3] Back button
In the menu/edit mode, short press to cancel the current menu operation or
return to the previous menu.
In the active image mode, short press to auto focus.
[4] Storage key
Used to freeze or save the image. Press this key once to freeze the image, press this
key again to save the image, and press the return key to return to the active mode. Long
press for 3 seconds to record, then short press to stop recording and save the video.
[5] Five direction keys
Including up, down, left, right and middle keys. It has different functions in different
operation modes.
In the menu mode (press the middle button to activate the menu and enter the
menu mode), the up, down, left, and right buttons are used for the same level of
menu operations, and the middle button enters the lower level menu or confirms
the selection.
In the active image mode, press the up and down buttons for digital zoom, and
the left and right buttons for electric focus.
[6] Trigger button