Any SOUND HUB input except AUX IN will select automatically
when a signal is present, unless an alternative input is already
playing. Auto sensing will also disengage Standby Mode.
NOTE:
RCA IN, COAXIAL IN and OPTICAL IN are all automatically
selected when a live audio signal is detected. OPTICAL IN (TV)
will be automatically selected when the source TV is simply
switched on – an audio signal is not necessary. The Bluetooth
and NPM inputs will automatically be selected when the source
Play button is pressed. The HDMI input will automatically be
selected when a connected TV is switched on.
NOTE:
To avoid unexpected and unwanted input selection, it is good
practice to switch off or stop playback on unselected inputs.
5. Using Your SOUND HUB
5.5 Auto Signal Sensing
Auto Signal Sensing can be disengaged if desired, leaving only
manual source selection available.
•
With your SOUND HUB switched on, press and hold the
front panel Source Selection button and turn the Volume
Control until the desired Auto Signal Sensing option is
displayed: “AU” indicates Auto Signal Sensing On, and “__”
indicates Auto Signal Sensing Off. Now release the Source
Selection button.
25
