3
With subwoofer cable accessible, bring the SUB S-100 to
the vicinity of the aperture and connect the cable to the
subwoofer terminals as illustrated in Diagram 7.
Depending on cable routing in the wall, the SUB S-100
subwoofer can be installed with the connection terminals
either at the top or the bottom.
4
Lift the SUB S-100 subwoofer into the aperture, being careful
not to trap the cable, and hold it in place. Use a cross-head
screwdriver or drill bit to tighten the eight dogleg clamp
screws located in the subwoofer front panel. It is good
practice to tighten opposite screws in turn.
DIAGRAM 7:
IN-WALL SUBWOOFER CONNECTIONS
NOTE
If the amplifier and audio system are connected and working,
it is good practice at this stage to check the integrity and
audio routing of the system by playing some audio and
checking that the subwoofer is operating correctly before it
is installed and secured in the wall.
Place subwoofer in wall.
3
Connect cables from the
amplifier to the subwoofer.
4
13
