c o n t e n t s
INTRODUCTION
4
UNPACKING
5
BREAK-IN
5
POSITIONING
6
CONNECTING
7
MOUNTING
8
TEMPLATE
8
CLEANING & MAINTENANCE
10
AVOID DIRECT SUNLIGHT
10
DISPOSAL
10
POWER AND ACOUSTIC PRESSURE
11
TECHNICAL SPECIFICATIONS
12
3
2
1
Read instructions - all the safety and operating instructions
should be read before the appliance is operated.
2
Retain instructions - the safety and operating instructions
should be retained for future reference.
3
Heed warnings - all warnings on the appliance and in the
operating instructions should be adhered to.
4
Follow instructions - all operating and use instructions
should be followed.
5
Water and moisture - the appliance should not be used
near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool and the like.
6
Carts and stands - the appliance should be used only with
a cart or stand if recommended by the manufacturer.
7
Wall or ceiling mounting - the appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8
Ventilation - the appliance should be situated so that
its location or position does not interfere with proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or placed in a built-in
installation, such as a bookcase or cabinet, that may
impede the flow of air through the ventilation openings.
9
Heat - the appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances that produce heat.
10 Power sources - the appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11 Power cord protection - power-supply cords should be
routed so that they are not likely to be walked on
or pinched by items placed on or against them, paying
particular attention to cords at plugs, convenience
receptacles and the point where they exit from appliance.
12 Cleaning - Use only a soft, damp cloth to wipe off dust
and grease.
13 Non-use periods - the power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
14 Object and liquid entry - care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
15 Damage requiring service - the appliance should be
serviced by qualified personnel when:
a)
The power-supply cord or the plug
has been damaged; or
b)
Objects have fallen, or liquid has been
spilled into the appliance; or
c)
The appliance has been exposed to rain; or
d)
The appliance does not appear to operate
normally, or exhibits a marked change
in performance; or
e)
The appliance has been dropped,
or the enclosure damaged.
16 Servicing - the user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
C A U T I O N
RISK OF ELECTRIC SHOCK DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE BACK PANEL.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash within an equilateral triangle is
intended to alert you to the presence of non insulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute an electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Dali Motif Manual UK C 18|12|2007 16:12 Side 2
