1
LT3/LT7 Thermal Image Camera User Manual
DALI
Warnings, Cautions and Notes
Definitions
WARNING Could cause bodily injury or death.
CAUTION Could cause damage to equipment or permanent loss of data.
NOTE provides useful information to the operator.
Important Information-Read before using the Instrument
WARNING - Laser Radiation is emitted from this device. Do Not stare into Laser
Beam. Class 2 Laser, 635 nm, 0.9mW.
CAUTION - Never point the lens directly toward a strong radiation source (ie. Sun,
direct or reflected laser beam, etc ), with power on or power off, as damage may
result to the thermal detector used inside. Permanent damage may result!
CAUTION - The original shipping carton should be kept for use for future
transportation. Do not drop, shake or impact the thermal imager excessively, in use
or during transportation.
CAUTION - Store the unit in its original case in a cool, dry, well-ventilated area
away from strong electromagnetic fields.
CAUTION - Protect the surface of the lens from being stained or damaged by
foreign objects such as sludge or chemicals. Please replace the lens cap after use.
CAUTION - Please remember to backup image data regularly to avoid losing
important data.
NOTE - For maximum measurement accuracy, allow 3 to 5 minutes for camera to
stabilize after initial power up.
NOTE - Each camera is factory calibrated. It is recommended that calibration be
performed every 12 months.
CAUTION - Do not open case. Unit does not contain any user serviceable parts.
Repair should be performed by factory authorized technicians only.