Dali Euphonia IWS 3 Phantom Скачать руководство пользователя страница 8

White Paper 

Euphonia IWS 3 Phantom

  

 
Dome, Sweet Dome 

The 29 mm oversized soft dome tweeter is especially designed for DALI. The tweeter is 
designed with a neodymium magnet structure with a rear chamber, a coated silk dome and 
a very long voice coil that allows undistorted reproduction of the high frequencies. 
 
The magnet system has three powerful neodymium magnets that provide a strong and 
stable magnet system.  
Copper rings are utilized to further enhance performance and to short circuit eddy currents 
in the magnet system, as well as optimise the impedance characteristics. 
 
The rear plate of the magnet system is ventilated to allow acoustical passage to the rear 
chamber of the tweeter for a significantly lowered resonance frequency of 750 Hz.  
The rear chamber itself is damped to suppress undesirable resonances. 

 

 

 

 
The geometry of the soft dome tweeter is designed for optimum dispersion characteristics 
and well-controlled rigidity. Rigidity is increased using a special coating on the silk dome. 
The coating is applied in a multi-step process in order to obtain the desired characteristics 
without sacrificing dynamics.  
 
All this ensures an unparalleled impulse response and energy-time-frequency 
characteristics. 
 
The voice coil is wound on a perforated aluminium form (for low compression) with extra 
large winding width for long-throw excursion. This ensures that compression is minimised 
when the soft dome tweeter handles high peak signals and enhances power handling. 
 
The soft dome tweeter is rolled in carefully around 3 kHz and is allowed to operate up to its 
natural high frequency limit well beyond 20 kHz without being rolled off in the crossover. 
Together, these features ensure smooth, stable performance – enhancing the overall 
quality of high frequency reproduction. 
 

Deserves a Ribbon 

As in the ultra high end DALI MegaLine, a ribbon tweeter is used in DALI Euphonia IWS 3 
Phantom. The ribbon tweeter has a broad frequency band and superb dispersion of the 
highest frequencies. The ribbon tweeter is gently rolled in above 10 kHz, reaching full 
contribution from 13 kHz to well beyond 30 kHz. The ribbon tweeter is a master in the 
horizontal dispersion of high frequencies and is a superb partner for the soft dome 
tweeter’s unique ability to reproduce frequencies from 3 kHz upwards. 
 

Page 8 of 14 

 

Содержание Euphonia IWS 3 Phantom















Отзывы: