background image

White Paper 

Euphonia IWS 3 Phantom

  

 
The sound from an in-wall speaker generates fewer reflections than a typical floor-standing 
loudspeaker. The listener will experience fewer reflections and less time smear, resulting 
in clear, accurate sound. But these inherent advantages can only be fully appreciated if the 
in-wall speaker has been designed to resist the influence of a “soft” wall and the cavity 
wall.  
 
DALI Euphonia Phantom is designed to deliver exceptional sound quality independent of 
the characteristics of the wall and wall cavity in which it is mounted. 
 

Phantom of the Opera, Jazz, Pop, Rock, Techno, Symphony, Folk, Blues… 

 

 
While the perception of sound is profoundly subjective and can ultimately only be judged 
individually, we will attempt to describe the Euphonia IWS 3 Phantom sound as objectively 
as possible.  
The Euphonia Phantom offers a convincing, high-resolution sonic illusion with great 
transparency and weight regardless of musical style. Voices and instruments are 
accurately positioned within the soundstage in a richly detailed sonic image. 
However please let the Euphonia Phantom convince you personally. 
 
 
 
 
 
 

 
 
 
 
Features    

 

 

• 

Low-resonance aluminium sealed enclosure 

• 

Unique drivers designed and developed by DALI 

• 

Low-compression rigid die-cast aluminium driver chassis 

• 

Low-loss rubber suspension 

• 

Ribbon and soft dome Hybrid Tweeter Module 

• 

29 mm neodymium soft dome tweeter 

• 

10 x 55 mm ribbon tweeter 

• 

Long excursion woofer basket 

• 

Stable flux magnet 

• 

Chamfered pole vent 

• 

Paper/wood Fiber Cones – low mass, high rigidity and non-resonant 

• 

Amplifier-friendly linear impedance 

• 

Handmade hardwired point-to-point crossover 

• 

Safety eyebolt for secure fixing 

• 

Painting mask and cut-out template included 

• 

Handcrafted in Denmark 

Page 13 of 14 

 

Содержание Euphonia IWS 3 Phantom















Отзывы: