background image

16

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

C

o

n

ce

p

t I

n

te

re

st

C

AUTION:

TO REDUCE THE RISK OF ELRCTRIC SHOCK, DO NOT REMOVE THE BACK P

ANEL. NO USER-SER

V

-

ICEABLE P

AR

TS INSIDE. REFER SER

VICING TO QUALIFIED PERSONNEL.

1.

  

Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.

  

Retain Instructions - The safety and operating instructions should be retained for future reference.

3.

  

Heed W

arnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.

  

Follow Instructions - All operating and use instructions should be followed.

5.

  

W

ater and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, 

 

laundry tub, in a wet basement, or near a swimming pool and the like.

6.

  

Carts and Stands - The appliance should be used only with a cart or stand if recommended by the manufacturer

.

7.

  

W

all or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer

.

8.

  

V

entilation - The appliance should be situated so that its location or position does not interfere with proper ventilation. For 

 

     

example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; 

 

     

or placed in a built-in installation, such as a bookcase or cabinet, that mayimpede the fl

 ow of air through the ventilation 

 

 

     

openings.

9.

  

Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other 

 

 

     

appliances that produce heat.

10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions 

 

     

or as marked on the appliance.

11. Power Cord Protection - Power

-supply cords should be routed so that they are not likely to be walked on or pinched by 

 

 

     

items placed on or against them, paying particular attention to cords at plugs, convenience  receptacles and the point 

 

 

     

where they exit from appliance.

12. Cleaning - Do not use any liquid cleaners. Use only a dry cloth to wipe of

f dust and grease.

13.

Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused  for a long 

 

 

     

period of time.

14. Object and Liguid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure 

 

 

     

through openings.

15.

 Damage Requiring Service - The appliance should be serviced by qualifi

 ed personnel when:

     

 a.

  The power

-supply cord or the plug has been damaged; or

     

 b.

 Objects have fallen, or liquid has been spilled into the appliance; or

 

     

 c.

  The appliance has been exposed to rain; or

     

 d.

 The appliance does not appear to operate normally

, or exhibits a marked change in performance; or

     

 e.

  The appliance has been dropped, or the enclosure damaged.

16. Servicing - The user should not attempt to service the appliance beyond that described in the operating  instructions. All 

 

 

     

other servicing should be referred to qualifi

 ed service personnel.

Th

lig

h

tn

in

g

 fl

 a

sh

 w

it

h

in

 a

n

 e

q

u

ila

te

ra

tr

ia

n

g

le

 is

 in

te

n

d

ed

 to

 a

le

rt

 y

o

u

 to

 th

p

re

s-

ence 

of 

uninsulated 

„danger

ous 

voltage“ 

w

it

h

in

 t

h

p

ro

d

u

ct

’s

 e

n

cl

o

su

re

 t

h

at

 m

ay 

b

o

su

ffi

 c

ie

n

m

ag

n

it

u

d

to

 c

o

n

st

it

u

te 

an electric shock to persons.

Th

ex

cl

am

at

io

n

 p

o

in

w

it

h

in

 a

n

 e

q

u

ila

-

te

ra

tr

ia

n

g

le

 i

in

te

n

d

ed

 t

o

 a

le

rt

 y

o

u

 t

the 

pr

esence 

of 

important 

operating 

and 

maintenance 

(servicing) 

instructions 

in 

the 

literatur

e accompanying the appliance.

SAFETY

Содержание Euphonia AS 2

















Отзывы: