DALGAKIRAN TIDY 20B-50, Руководство оператора, Страница: 62 / 157

5
1.10 SUGGESTIONS
9 After repair, maintenance and adjustment works make sure that there is not any spare part,
cleaning material or hand tool are left inside.
9 Make sure that all the guards are installed after repair, maintenance or adjustment works.
9 Make sure that none of the moving parts are in contact with any component.
9 Do not leave unplugged electric conducting cables.
9 If the compressor will not be used for a long time; it should be stored at dry and warm
environment. The oil in the oil tank should be discharged and the screw unit has to be lubricated
with a protective lubricant against corrosion. If the compressor have belt driving the belts must be
removed or completely loosened.
1.11 AIR RECEIVER
9
Air receivers are to collect air, do not use for any other purposes. Do not exceed the pressure
value indicated on the name plate.
9 The floor on which the compressor is mounted should be capable of carrying the weight of
compressor and should be flat.
9 Technical specifications of the receiver are written on the name plate
9 Water must be discharged from the valve beneath the receiver for daily maintenance
9 Without any written approval of the factory, do not make any welding on the receiver
9 Do not make any cutting and piercing on the receiver
9 The designed value of corrosion tolerance is 0,5 mm
9 The receivers were tested up to 1,5 times the working pressure
9 According to regional regulations every year pressure test must be done to check the air receiver.
Please consult your local distributor or technical service
9
Welding points should be checked by eye regularly. If any extraordinary point is seen inform the
distributor immediately
9 During the maintenances avoid any impact and operation that will damage the receiver.