Dale Power Solutions E200 Series, Руководство пользователя

Страница: 18 / 36

Dale Power Solutions Ltd
User Manual
18
…………………………………………………………………………………………………………
Navigating the system menu
To access a menu item:
1.
Press ◄ or ► until the following list is displayed:
2. Press Ent . An arrow ( ) appears next to Figure . The arrow must be next to the menu item you wish
to enter.
3. Press
◄ or ► to move the arrow up or down the list to the menu item you wish to enter.
4. Press Ent .
You can then use the
◄, ► and
Ent buttons in a similar way to navigate to the various sub-menus and
make changes if necessary. To return to the previous menu level, press ESC .
The following sections show the full menu structure for each of the four main menu items listed above.
Note: The values shown below are examples only. The values in your system are likely to be different.
Figure menu items
These menu items provide UPS operating information only.
Status menu items
These menu items provide UPS system information only. There are five sub-menu items as shown below:
State information
Alarm and Fault info. Rate Power information
Status
Rate POWER
MachInfo: 0101
Rate: 6KVA
Status
Rate POWER
Code
Version
Status
Alarm & Fault
Status
State
Alarm & Fault
Rated POWER
Status
State
Battery Charging
Battery Boost Status
State
Inverter ON
Battery Charging Status
State
CurState: Mains
SWMB OFF
Figure
Temperature °C
Inner: 20
REC: 20 INV: 20 Figure
Bus
-390V +390V Figure
NBatt Charge
111.1V 0.4A Figure
PBatt Charge
111.1V 0.4A
Figure
Invert
230.0V
50.0Hz Figure
Output
0KW PAK: 0
0KVA Figure
Output
230.0V 0.0A
50.0Hz Load:0% Figure
Mains
230.0V 0.0A
50.0Hz
Figure
Status
Setting
Command