TRIMAX 520
Page 22
More shallow soil cultivation
To change to a more shallow setting, the T-ring-roller is pulled up via the
double working hydraulic functionality (Hose marking, Green).The working
depth can be read in the
Dalbo Depth Control
LCD display in the cabin.The
top rod length is adjusted, if necessary until the frame is horizontal.
When changing the depth, it may be necessary to adjust the top rod, as the
frame should always be in a horizontal position.
Dalbo Depth Control
The working depth is controlled by the T-ring-rollerpositioned at the very back,
as well as the lifting height setting at the front end.The setting of the working
depth
”Dalbo Depth Control”
is made via the doubleworking hydraulic
functionality(Hose marking, Green ).The working depth can be read in the
LCD display in the cabin, or, alternatively, the mechanical depth scale mounted
close to the hydraulic cylinder.
Fig. 12
Dalbo Depth Control provides a clear
overview of the task at hand, regardless of
the conditions in terms of light and dust.
Strongly improved ergonomics for the
driver and increased uniformity in the soil
cultivation.
When changing the depth, it may be necessary to adjust the top rod, as the
frame should always be in a horizontal position.
Depth adjustment of the discs
Fig. 13
The correct adjustment of the discs
leaves behind a plain field without
visible traces from the harrow tines. The
fine-tuning of the discs is made using the
spindle (A) and can not be done before
TRIMAX is actually in the field. The
discs are adjusted for work in the surface,
so that an adequate amount of soil is
thrown back towards the harrow tine.
This can be applied up onto a certain
speed, depending on the soil conditions.
A