DALBO ROLLOMAXIMUM XL, Руководство пользователя

Страница: 36 / 42

ROLLOMAXIMUM XL
Page 36
Replacing the roller in the front centre section
Lifting gear with a minimum lifting capacity of 1000 kg must be available.
Replacing the front centre roller
1. The machine is extended into
the working position and low-
ered via the wheel frame (A)
until the axle (B) just touches
the ground.
2. Loosen and remove bolts (C)
3. Then raise the machine on the
wheel frame (A) again.
4. The axle with cross-kill rings
are no free and can be moved
for repair with the lifting gear.
5. Reverse procedure for assem-
bly
Do not activate hydraulics if persons are within machine extension radius.
A
B
A
C
A