MAXIDISC
Side 8
Hydraulic System
•
Never allow bystanders within the operating radius of the MAXIDISC when the
hydraulic system is activated to avoid the danger of an individual being
crushed or pinched between the equipment.
•
Before performing maintenance or repairs on the hydraulic system, lower the
implement to the ground, relieve pressure in the system, turn off the engine
and remove the ignition key.
•
Clean the hydraulic fittings thoroughly before connection. Ensure that the
pressure is relieved in the hydraulic system before connecting the hydraulic
hoses to the tractor’s hydraulic services.
•
After making repairs to the hydraulic system, thoroughly bleed air out of the
system.
•
Regularly check hydraulic hoses for defects such as cracks, bends, chafing or
leaks.
•
Avoid spilling oil on the ground. In case of spills, collect the oil and dispose of it
properly.
•
In case skin should come in contact with hydraulic oil or grease or in case
clothing should become stained with oil, remove the stained clothes immedi-
ately and wash the affected skin areas thoroughly. Oil and grease are harmful
to the skin.
•
Escaping hydraulic oil under high pressure can penetrate the skin and cause
severe injury. If an accident occurs, see a doctor immediately.
Hitching
•
An individual is in danger of being crushed during the hitching process. Never
place yourself or anyone else between the tractor and the MAXIDISC, or be-
tween parts that must be attached or connected.
Maintenance and Repairs
•
Before servicing or making adjustments to the machine, securely block or un-
fold the machine, engage the tractor and machine brakes, stop the engine and
remove the keys.
•
Tighten all nuts, bolts hydraulic fittings or any other fastened assemblies after
a few hours’ use. Check often to make sure that they remain tho
roughly tight-
ened. Inspect all pins, screws and bolts for wear or damage and make sure that
all are securely in place to avoid any possible damage or breakdown of the ma-
chine.
Содержание MAXIDISC 300
