DALBO FRONTFLEX Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 22

DALBO FRONTFLEX Скачать руководство пользователя страница 17

FRONTFLEX

Side 17

Fig. 12

1.

Mount the telescoping brackets (A) behind the front tube of the main frame.
Mount the middle telescoping piece halfway between the spacing piece and
the towing eye (B).

2.

Attach the mounting plates (C) to the threaded spindle shafts. Fasten the
nuts. Only the two spindles on the outside adjust the depth. The middle tel-
escoping piece is mounted without a spindle and a different mounting plate
is used.

Crackerboard

Model

Weight

Number of Tines

150

115

18

300

175

22

Maintenance

Tighten all nuts, bolts, or any other fastened assemblies after the first workday. It is
important that the bolts on which the Crackerboard is hinged (Fig. 13, A) are proper-
ly  tightened  so  the  Crackerboard  can  move  freely  when  changing  the  angle.  (The
nuts  are  self-tightening).  Check  all  nuts,  bolts  and  fastened  assemblies  regularly
and tighten when necessary.

Fig. 13

Lubricate the grease fittings on the spindles (B) every 6 months or as necessary.
There are no other points on the Crackerboard that require lubrication.

Indicator Lights

A

B

A

B

C

«
...
15
16
17
18
19
...
»

Содержание FRONTFLEX























Отзывы:

Нет отзывов